Fence ideas and types of fences for Vancouver, WA and Portland, OR
If you are comparing fence ideas for a Vancouver, WA or Portland, OR yard, the useful question is not which style is trending. It is which fence will still stand straight after a wet winter, give you the privacy you need, and fit your budget, HOA, and permit rules.
Woodmasters USA is locally owned and operated, with over 20 years in business. We are licensed in Oregon and Washington and insured. We build cedar, vinyl, chain link, hog wire, ornamental metal, composite, and steel panel fences across Clark County and the Portland metro. Estimates are free and on site. The wood fence ideas below, plus vinyl, chain link, hog wire, and other low-maintenance options, are the styles we actually install.
Rain, rot, and wood choice in the Pacific Northwest
Clark County and Portland get months of rain, then dry stretches that shrink wood. The weak point is rarely the face of a cedar board. It is the post in the ground, the bottom of a board sitting in wet soil, and hardware that rusts or stains.
Western red cedar is the board we use most often. It is naturally rot-resistant, and with care the boards often last 20 to 25 years. You can stain or seal it to keep the color, or leave it alone and let it silver. Pressure-treated wood is the lower-cost treated option. It is meant to be painted or stained, and it is common for posts because the post sits in the ground. A practical mix we use a lot is cedar boards on pressure-treated or steel posts.
If an older fence is already leaning or rotting at the posts, start with fence repair or fence repair in Vancouver, WA. Sometimes a section can be saved. Sometimes replacement is the honest answer, and that is the time to change the style.
Permits, HOA rules, and property lines
It depends on the property, and we confirm the requirement for your lot before we build. In unincorporated Clark County, WA, fences 7 feet or less generally do not require a building permit under county rules. Cities inside the county, including Vancouver, Camas, and Battle Ground, can set different rules. In Portland, OR, fences 7 feet or less generally do not require a permit unless the fence encloses a pool. Front-yard height, setbacks, and overlay rules can still be tighter than the backyard.
Many HOAs in Camas, Ridgefield, Happy Valley, and parts of Vancouver and Portland also have rules on height, style, and color. Those rules are separate from the city or county permit. If the line is near a wetland or a protected area, start with our guide to fencing near wetlands in Washington and Oregon.
Fence styles we build
Horizontal cedar
Horizontal cedar is the modern wood fence, with boards running side to side, often in mixed widths, and a matching gate. It is a frequent choice for newer homes in Vancouver, Camas, and inner Portland.
Look: Clean and linear. Privacy: Full if the boards are tight; semi-privacy with small gaps. Durability: Same cedar as a vertical fence; it needs solid posts, especially on a slope. Upkeep: Stain or seal to keep the color, or let it silver. Cost: $$ Typical installed price is $60 to $80 per foot, with gates $600 to $950, on the fence cost guide.
Shadowbox / good neighbor
A shadowbox, or good neighbor, fence uses alternating boards so both sides of the line have a finished face.
Look: Finished on both sides, not a backside of rails and nails. Privacy: Semi-private; you cannot see straight through, but light shows at an angle. A strong choice when two neighbors will share the fence. Durability: Cedar on treated or steel posts; the extra boards add some stiffness. Upkeep: Stain both faces if you finish it, or let both sides silver. Cost: $$ (no per-foot price is published). It uses more lumber than a basic one-sided privacy fence, and less than full board-on-board.
Board-on-board
Board-on-board is the full-privacy wood fence. Boards overlap so that when cedar shrinks, you still do not get a see-through gap.
Look: A solid privacy wall, often with a cap rail and capped posts on higher-end versions. Privacy: Full, including after the first dry season. Durability: The overlap hides shrinkage; posts and board bottoms still have to be detailed for rain. Upkeep: Stain or let it gray. A cap rail sheds water off the end grain and is worth it on a long run. Cost: $$ A premium cedar fence with vertical boards, a cap rail, and capped posts is typically $65 per foot, with gates around $650. A simpler run without those details may land lower; we price that on site.
Dog-ear and flat-top privacy
This is the classic backyard privacy fence: vertical cedar boards on two rails, with either a dog-ear cut or a straight flat top. It is usually the most affordable cedar option.
Look: Familiar and clean. Flat-top reads a little more tailored; dog-ear is the traditional cut. Privacy: Full when the boards are set tight, though small gaps can appear as the wood shrinks. Durability: Solid for the price. A third rail or a cap helps on taller or more exposed lines. Upkeep: Stain in the first season if you want even color, or let the boards silver. Cost: $ Typical installed price for a basic cedar fence with flat-top boards and two rails is $45 to $50 per foot, with gates $390 to $520.
Picket
A picket fence is the open, shorter wood fence, usually for a front yard. It marks the line without building a privacy wall.
Look: Classic and lighter than a privacy fence. Tops can be dog-ear, flat, or a custom cut. Privacy: Low, which is often the point in a front yard, where height limits can also be lower. Durability: Good when posts are set correctly. Upkeep: Stain or let it weather. Cost: $ to $$ (no per-foot price is published). It often costs less than a full-height privacy fence, though custom tops and steel posts can move it up.
Lattice-top
A lattice-top fence is a privacy fence with a lattice panel on top. You get height and a finished look without making the entire face a solid wall.
Look: Traditional, with a decorative band of lattice above the boards. Privacy: Full at eye level, with filtered light and air through the lattice. Durability: Same as the privacy fence under it, if the lattice is framed so it stays square. Upkeep: Stain the lattice and the boards at the same time. Cost: $$ (no per-foot price is published). It is usually a step above a basic privacy fence.
Wood with metal posts
This is a better way to build almost any wood fence in this climate, not a separate look. The boards can be vertical, horizontal, shadowbox, or picket. The posts are steel, sometimes wrapped in cedar. Wood posts fail at grade first; steel posts take the soil and the rain.
Look: The same as the wood style you choose. Black posts can be left visible for a modern line; cedar-wrapped posts keep a traditional wood face. Privacy: Whatever the wood style provides. Durability: Steel posts stay straight longer in wet ground than wood posts. Upkeep: You still maintain the cedar face, but you are not replacing rotten posts as often. Cost: $$ to $$$ (no published upgrade price). It costs more than the same fence on pressure-treated posts.
Vinyl
Vinyl is the no-stain privacy or picket fence. It resists rot, warp, and fade, and it keeps the color it was installed in. If you want a low-maintenance fence, this is usually the first material we talk through.
Look: Clean, consistent panels, often with a top rail and capped posts. It does not have real wood grain, even when the panel is textured. Privacy: Full in a solid panel; open in a vinyl picket. Durability: Vinyl will not rot the way an unfinished wood board can. Posts and gates still have to be set correctly, and steel reinforcement helps in wind. Upkeep: Wash it. No sanding, staining, or painting. Cost: $$$ Typical installed price is $85 to $150 per foot, with gates $700 to $1,500, on the fence cost guide.
Chain link
Chain link is the straightforward metal fence: lower cost, low upkeep, and quicker to install than a cedar privacy wall. It fits large lots, dog runs, and commercial yards.
Look: Galvanized mesh is the basic option. Black or colored vinyl-coated mesh reads quieter. Privacy slats can be added when you want a screen without switching to wood or vinyl. Privacy: None on open mesh. With slats, you get a screened view, not a solid wall. Durability: Strong in wet weather. It will not warp. Upkeep: Very low. Inspect gates, tension, and fittings. Cost: $ for a basic open run (no per-foot price is published for open mesh). $$ for black chain link with privacy slats, typically $58 to $70 per foot, with gates around $700.
Hog wire / modern wire panel
Hog wire, or a modern wire panel fence, frames steel mesh in cedar, often on steel posts. It keeps a view and a boundary at the same time, which is why it shows up on front yards, garden lines, and modern remodels in Portland and inner Vancouver.
Look: Open and more architectural than chain link. The cedar frame is the visual piece; the wire does the containment. Privacy: Low to moderate. A taller cedar kickboard can hide a bit of the yard without closing the whole fence. Durability: The steel mesh holds up well; the cedar frame needs the same detailing as any wood fence, and steel posts are a smart match. Upkeep: Low on the wire. The wood frame can be stained or left to silver. Cost: $$ (no per-foot price is published). It is usually more than basic chain link and less than a high-end vinyl run, depending on the frame and posts.
Low-maintenance options
If a low-maintenance fence is the main goal, here is the honest ranking for this climate:
- Vinyl. No stain, no rot in the panels, wash when it needs it. Highest upfront cost among the common backyard options.
- Chain link. The lowest-cost low-upkeep fence. Add slats only if you need a screen.
- Composite and Sim Tek panels. A wood look without splinters or rot. Boards we install include Composite, Creative Surfaces, Sim Tek, NewTechWood, Trex, Mandoria, and Veranda Vinyl; the quote names the board. There is no published per-foot price for composite fencing on the cost guide. See composite fences.
- DuraBond or similar steel panel fences. A solid metal privacy wall with very little upkeep. Typical installed price is $85 to $110 per foot, with gates $1,200 to $2,700.
- Cedar on steel posts. The lowest-maintenance wood fence, not a maintenance-free fence. You may still stain the cedar. You are not replacing rotten wood posts as often.
Ornamental metal is another low-upkeep option for an open front-yard fence. Typical installed price is $95 to $180 per foot. Details are on the ornamental iron fences page. No fence is zero work if the posts are set poorly. Low maintenance starts with the footing, not just the material.
Comparison table
Typical installed prices are 2026 ranges, labor and materials, from the Clark County and Portland fence cost guide. Totals change with length, slope, gates, staining, or removing an old fence.
| Style | Privacy | Upkeep | Cost | Typical installed price |
|---|---|---|---|---|
| Dog-ear or flat-top cedar | Full; gaps can appear later | Stain or let it gray | $ | $45–$50 per foot |
| Shadowbox / good neighbor | Semi-private, finished both sides | Stain both faces if finished | $$ | Not published |
| Board-on-board / premium cedar | Full, even after shrinkage | Stain or let it gray; a cap helps | $$ | $65 per foot for the capped premium build |
| Horizontal cedar | Full or semi, depending on gaps | Stain or let it gray | $$ | $60–$80 per foot |
| Picket | Low | Stain or let it gray | $–$$ | Not published |
| Lattice-top | Full at eye level, open at the top | Stain lattice and boards together | $$ | Not published |
| Wood with metal posts | Same as the wood style | Maintain the cedar, not the posts | $$–$$$ | Not published as an upgrade |
| Vinyl | Full (privacy) or low (picket) | Wash only | $$$ | $85–$150 per foot |
| Chain link | None, or screened with slats | Very low | $–$$ | $58–$70 per foot with privacy slats |
| Hog wire / modern wire panel | Low to moderate | Low on the wire; maintain the frame | $$ | Not published |
| DuraBond steel panel | Full | Very low | $$$ | $85–$110 per foot |
A 200-foot fence with two gates typically lands around $10,080 to $11,340 for basic cedar, $13,500 to $18,200 for horizontal modern wood, $13,300 to $15,700 for black chain link with slats, $14,600 for premium cedar, $18,700 to $33,300 for vinyl, and $19,700 to $27,700 for DuraBond, per the same cost guide.
Which fence is right for you?
Use this as a starting point. The on-site visit is where we measure, look at the slope and the neighbor line, and give you an exact price.
- Backyard privacy at the lowest cedar price: start with a flat-top or dog-ear privacy fence. If you do not want gaps after the wood shrinks, step up to board-on-board.
- A fence you and a neighbor will share: shadowbox, or good neighbor, looks finished from both sides.
- A modern wood fence: horizontal cedar, often on metal posts.
- A front-yard fence that keeps the view: picket, hog wire, or ornamental metal, at the height your city and HOA allow.
- A little more height without a solid wall all the way up: lattice-top on a privacy fence.
- No stain schedule: vinyl first, then composite or steel panel, then chain link if the look is acceptable.
- Dogs, a large lot, or a utility run: chain link, with slats only where you need a screen.
- Wood without replacing rotten posts: keep the cedar face and put it on steel posts.
- An old fence failing in sections: ask about repair first. If the posts are gone, replacement is usually the better spend, and you can change the style at the same time.
We install fences in Vancouver, WA and Portland, OR, and the surrounding cities. The same crew handles the estimate and the build.
FAQ
What types of fences work best in Vancouver and Portland weather?
Cedar is the wood that belongs in this climate, especially on steel or pressure-treated posts that can handle wet ground. Vinyl, chain link, composite, and steel panels are the lower-maintenance options if you do not want to stain.
How much does a fence cost in Clark County and Portland?
Most fences cost $45 to $120 per linear foot installed, depending on style. On the 2026 cost guide, a basic cedar fence is typically $45 to $50 per foot, horizontal modern wood is $60 to $80, and vinyl is $85 to $150. Slope, gates, staining, and old-fence removal change the total. The exact price comes from a free on-site estimate.
Do I need a permit for a fence in Clark County or Portland?
In unincorporated Clark County, fences 7 feet or less generally do not require a building permit. In Portland, fences 7 feet or less generally do not require a permit unless the fence encloses a pool. Cities inside Clark County can set different rules, and HOA, setback, and overlay rules can still apply. We confirm the requirement for your lot before we build.
What is the difference between shadowbox, board-on-board, and a basic privacy fence?
A basic dog-ear or flat-top privacy fence is one layer of vertical boards, and small gaps can appear as the wood shrinks. Board-on-board overlaps the boards so those gaps do not open up. Shadowbox alternates the boards for a finished look on both sides, with a little more openness.
What is the most low-maintenance fence?
Vinyl, if you want a solid privacy fence and do not want to stain. Chain link, if an open or slatted metal fence is acceptable. Composite or steel panel, if you want a wood look or a solid metal wall without the upkeep of cedar. Cedar on steel posts is the lowest-maintenance wood option, not a maintenance-free one.
Can you repair my fence instead of replacing it?
Often, yes, if the rest of the run is sound and the problem is a leaning post, a damaged gate, or a section of broken boards. If the posts are failing down the line, replacement is usually the better value. See fence repair and fence repair in Vancouver, WA.
Get a free estimate
If you want help choosing a style, or you already know what you want, request a free on-site estimate. We measure the run, talk through privacy, upkeep, and budget, and leave you a written quote.
0% financing for 18 months is available on approved credit. We are licensed in Oregon (CCB 241262) and Washington (L&I WOODML*796QR) and insured.
Call (360) 921-0350, or send the form on the quote page. Financing details are on the financing page. Typical prices, including 200-foot examples, are on the fence cost guide.
Related reading on the site
- Fence installation in Vancouver, WA
- Fence installation in Portland, OR
- Fence prices in Vancouver, WA and Portland, OR
- Fence repair
- Fence repair in Vancouver, WA
- Fence repair in Portland, OR
- Cedar fences
- Vinyl fences
- Chain link fences
- Composite fences
- Fencing near wetlands in Washington and Oregon
- Why a rot replacement is the right time to change the deck
- Deck permitting in Washington and Oregon
- Deck cost-saving tips for Vancouver and Portland
- 20x24 carport build in Salmon Creek, WA
Written by Woodmasters LLC.